PTFE (polytetrafluoroethy) waxaa caadi ahaan loo yaqaan PTFE, Teflon iyo King Plastic.Teflon extruder waa mishiin ku takhasusay soo saarista PTFE (UHMWPE) ptubeucts.Iyada oo loo marayo nidaamyo taxane ah sida extrusion, kululaynta, iyo qaboojinta, alaabta ceeriin ee budada PTFE ee horay loo sii daayay waxaa lagu farsameeyaa tuubada tuubada ee PTFE tuubada tuubada PTFE kuwaas oo la kulma tilmaamo kala duwan.Ay saameeyeen arrimaha la xidhiidha sida isticmaalka, qeexida, maaddooyinka, shuruudaha isticmaalaha, iwm., Suko wuu nakhshadeeyaa oo soo dhejin karaaMashiinnada tuubada PTFETilmaamo kala duwan.Polytetrafluoroethylene (miisaanka aadka u sarreeya ee polyetylen) ptubeucts ptubeuced by ram tube extruder ayaa si weyn loogu isticmaalaa kiimikada, caafimaadka, hawada, farsamaynta farsamada, kulaylka isweydaarsiga iyo beeraha kale.
Suko oo leh sannado badan oo cilmi-baaris iyo khibrad horumarineed ah oo ku saabsan qalabka PTFE, oo ku takhasusay cilmi-baarista, horumarinta, farsamaynta iyo iibinta qalabka PTFE.Qalabkayagu wuxuu u adeegay ku dhawaad afartan waddan iyo gobollo suuqa caalamiga ah.Macaamiishayadu waxay ka yimaadeen warshadaha caafimaadka, warshadaha hawada, warshadaha milatariga, warshadaha kiimikada, warshadaha baabuurta iyo qalabyada tuubooyinka farsamada ee kala duwan, iyo Suko waxaa si weyn loo aqoonsaday by warshadaha fluoroplastic caalami ah.
Qiimaha shirkadda: Hal-abuurka, Tignoolajiyada, Hufnaanta iyo Sirdoonka.
Hadafka shirkadda: In la abuuro summada ugu horreysa adduunka ee qalabka PTFE.Suko waxay mudan tahay kalsoonidaada.
1. Tilmaamaha PTFE (UHMWPE) RAM TUBE EXTRUDHA
- Horumarinta joogtada ah, qalabku waa ka caqli badan yahay, xasiloon oo waxtar badan leh.
- Qalabka waxaa gacanta ku haya nidaamka PLC, oo si toos ah ugu shaqeeya hawl fudud.
- Naqshad kala duwan, qalabku wuxuu dabooli karaa baahiyaha kala duwan ee isticmaalayaasha, waxaana loo habayn karaa macaamiisha.
- Qalabku wuxuu u shaqeeyaa si deggan muddo dheer, oo leh buuq hoose.Waxayna hoos u dhigtaa kharashaadka iyadoo la badbaadinayo tamarta iyo tamarta inta lagu jiro dayactirka cadaadiska.
- Qalabka iyo caaryada waxaa lagu sameeyay tignoolajiyada gaarka ah, iska caabinta daxalka, waara oo leh nolol adeeg dheer.
- Naqshadeynta qalabku waa mid sahlan waxayna qaadataa meel yar.
- Ptubeucts extruded waxay leeyihiin waxqabad heer sare ah marka loo eego cufnaanta iyo xoogga cufan.
- Ku qalabaysan habka quudinta tooska ah, buuxinta baaldi 50-80 kg ah, nidaamka quudinta tooska ah wuxuu dammaanad qaadi karaa saacadaha 4-8 ee hawlgalka wuxuuna badbaadin karaa kharashka shaqada ilaa xad.
- PTFE ram tube extruder ayaa si joogto ah u riixi kara tuubada tuubada waa la gooyn karaa iyadoo loo eegayo shuruudaha.
- Bixi nidaamka caaryada oo dhamaystiran, kaas oo ay ku jiraan qalab dhamaystiran oo u dhigma, nidaamka kulaylinta iyo sintering, nidaamka qaboojinta, heerkulka xakamaynta, iwm.
2. SHURUUDAHA KU SHAQEEYA QALABKA
- Dhulka goobta ayaa loo baahan yahay inuu ahaado mid siman, iyo culeyska goobta uusan ka yarayn shuruudaha naqshadeynta.
- Meesha ay ku shaqeyso waxay u baahan tahay meel nadiif ah si ay u yareyso soo galitaanka boodhka.Waxaa ugu wanaagsan in fadhiga lagu sameeyo hawo-mareenada si loo fududeeyo hawo-qaadista.
- Heerka awooda warshadaha 380V 50Hz 3P, danab waxaa loo habeyn karaa iyadoo loo eegayo baahiyaha isticmaalaha.
- Warshada ayaa waxaa ku rakiban armaajooyin koronto qeybin ah,hawo ciriiri ah iyo qalab kale oo taageeraya.
- Qalabka wuxuu u baahan yahay in lagu qalabeeyo habka qaboojinta.Laba baaldi / haamaha biyaha ayaa lagu isticmaali karaa bamka qaboojinta si dib loogu warshadeeyo ilaha biyaha.
- Heerkulka qolka ee warshadda waa in la xakameeyaa wax ka yar 28 ° C.
- Qalabka ciribtirka tooska ah wuxuu ka soo baxaa kor ilaa hoos.Qalabka waxaa lagu rakibay masrax ama sagxad leh meel bannaan oo dhererkeedu yahay ilaa 2.8 mitir.Fogaanta wax ku oolka ah ee jihada dhererka ah ee qalabka ayaa loo baahan yahay in la tixgeliyo, dherer ku filan waa in lagu dammaanad qaadaa godka wareegtada go'an ee qalabka si loo buuxiyo shuruudaha dhererka extruded.tuubada PTFE.
3. QAYBAHA QALABKA
4. Rakibaadda QALABKA IYO shaxanka rakibidda caaryada
| Qaabka Mashiinka | PFG150 | PFG300 | PFG500 |
| Habka | Tooska Ram Extruder M/c | ||
| Awood KW (matoorka korontada) | 15kw | 22kw | 72kw |
| Cabbirka Range OD | 20-150mm | 150-300mm | 300-500mm |
| Dulqaadka THK | 0.1-0.2mm | 0.1-0.2mm | 0.1-0.2mm |
| Dulqaadka OD | 0.1-0.5mm | 0.5-2mm | 3mm |
| Dhererka Tuubbada Bannaanka ah | Ku sii wad extrude dherer aan xadidnayn | ||
| Wax soo saarka saacadii KG | 8+ | 10+ | 13+ |
| Voltage/ PH/Hz | 380V 50Hz 3P | 380V 50Hz 3P | 380V 50Hz 3P |
| Caaryada | Cabbirka caaryada waxaa loo habeeyey iyadoo loo eegayo qeexida macaamiisha.Qalabka caaryada oo dhameystiran waxaa ka mid ah jirka caaryada, madaxa extrusion, flange xiriirinta, xirmo dhameystiran oo heerkul sare ah oo giraangiraha kuleylka ah, qalab dhameystiran oo dareemayaal, nidaamka jaakada biyaha qaboojinta, iyo khadka isku xirka heerkulka sare, caaryada iyo taageerada alaabta. Dhammaadka dusha sare waxaa si gaar ah loogu daaweeyaa si siman, waara, oo u adkaysta daxalka.Dhumucda suufka dahaarka ayaa ka badan 5mm, dhumucdiisuna waxay ka badan tahay 10mm. | ||
5. Rakibaadda QALABKA IYO shaxanka rakibidda caaryada
6. HABKA SHAQADA QALABKA
- Hubi in qalabka korontada ku shaqeeya iyo korantadu ay isbarbar socdaan, iyo in isku xirka khadka uu waafaqsan yahay jaantuska fiilooyinka.
- Hubi booska saliidda biyo-xidheenka oo hubi in xadhkaha biyo-mareenku ay si habboon ugu xidhan yihiin.Xaqiiji isku xirka biyaha qaboojinta iyo isku xirka hawada cufan
- Hubi in caaryada si sax ah loo rakibay iyo in kale.Orod oo gacanta ku sax si aad u xaqiijiso.
- Daar koronta oo deji cabirrada sida cadaadiska, heerkulka aagga heerkul kasta, wakhtiga haynta, iyo dejinta quudinta tooska ah ee nidaamka PLC.
- Ku dar budada la sii diyaariyay ee la sii diyaariyay ku shub weelka ama foosto (gacan ama si toos ah).
- Bilow mishiinka.
- Iska yaree tuubada PTFE ee la soo saaray dhererka loo baahan yahay.
- Demi mishiinka oo nadiifi caaryada markaad isticmaasho ka dib.
7. ILAALINTA QALABKA IYO CARUURTA
- Si joogto ah u hubi dhererka, nadaafadda iyo heerkulka saliidda hydraulic.
- Waxaa lagu talinayaa in la beddelo saliidda biyo-biyoodka lixdii biloodba mar.
- Bedelay shaabadihii xidhnaa ee waqtigii loogu talagalay.
- Caaryada waa in la nadiifiyaa oo la ilaaliyaa wakhtiga, iyo dusha sare waa in lagu daboolaa lakab khafiif ah oo saliid ilaalin ah.
- Si taxadar leh u qabooji dareenka heerkulka gariiradda kuleyliyaha, oo si habboon u kaydi.
8. QAABYAALAHA IYO QAYBAHA BADBAADADA SHARAXA
- Qalabku waxa uu ka kooban yahay mishiin weyn, xarun biyo-diid ah, golaha kontoroolka, quudiye toos ah, wax-haysta, godadka kululaynta, caaryada iyo qalabyo kale.Qalabka qalabka lagama maarmaanka ah waxaa loo diraa macaamiisha qalabka wata.
- Liiska qalabka lagama maarmaanka u ah qalabka waxaa loo diraa isticmaalaha qalabka.
- Marka adeegsaduhu uu iibsado qalabka shirkadeena, marka lagu daro agabyada lagama maarmaanka ah, waxaanu siin doonaa agabka dheeriga ah ee lagama maarmaanka u ah isticmaalaha si uu u bedelo oo u dayactiro qalabka.Qaybaha spare waa qaybo caadi ah waxaana laga iibsan karaa suuqa deegaanka.
9. HAGAHA HABKA
- Sababtoo ah tignoolajiyada gaarka ah ee qalabka, macaamiishu waxay aadi karaan warshadda si ay u bartaan rakibaadda, komishanka, hawlgalka, isbeddelka caaryada, dayactirka, hagida habka qalabka bilaashka ah ka hor intaan la keenin.
- Haddii aadan awoodin inaad u timaado shirkadeena si aad wax u barato sababo la xiriira dhibaatooyinka sida masaafada, shaqaalaha, waqtiga, waxaan kuu diyaarin karnaa injineerada inay u yimaadaan si ay u hagaan rakibidda, hawlgelinta, hawlgalka, beddelka caaryada, dayactirka, iyo habraaca hagida qalabka hoos yimaada. heshiiska dhinaca kale.
- Waxaan sidoo kale sameyn karnaa hagitaan fog.Isticmaalayaashu waxay dooran karaan habab kale sida telefoonka, fiidiyowga, iimaylka, iwm. si ay u bartaan wax ku saabsan rakibaadda qalabka, hawlgelinta, hawlgalka, beddelka caaryada, dayactirka, hagidda habka, iwm. ee qalabka.
10. ADEEGGA IIBKA KA DIB
- Laga bilaabo taariikhda la helay mashiinka, muddada dammaanadda ee dhammaan qalabka mishiinku waa hal sano.Waxaan bixinaa adeeg hagitaan dayactir bilaash ah inta lagu jiro xilliga dammaanadda.
- Haddii ay jiraan wax dhibaato ah oo ku saabsan qalabyada ka baxsan muddada dammaanadda, fadlan nala soo xiriir si aad u sharaxdo dhibaatada, waxaanan ku siin doonaa xallinta dabagalka 24 saacadood gudahood.
- Haddii aan haysano qaybiye maxalli ah, waxaan la xiriiri karnaa qaybiyaha deegaanka si aan iskaashi u helno.
- Dhammaan su'aalaha ku saabsan qalabka waxaa nagula tashan kara boostada, muuqaalka, telefoonka, iwm.
- Telefoonka Adeegga:+86-0519-83999079
11. QALABKA Quudinta tooska ah ee Qadka PTFE TUBE
Vacuum quudinta tooska ah, oo ay ku jiraan nidaamka dib-u-celinta hawo-mareenka, bilaw nidaamka quudinta, tuubada dhaqda, qoriga nuugista, koronto-dhaliyaha vacuum, kontoroolka PCB, soo saarida 30-300 kg / h, dhexroor 150mm iyo dhererka 600mm, deji waqti quudinta tooska ah iyo wakhtiga daadinta, budada socodka waa la kontarooli karo, dhammaan qalabyada birta ah ee aan birta lahayn, kontoroolka caqliga leh.
Foostada isku dhafka ah waa 600mm dhexroor ah iyo 700mm oo dherer ah, oo leh 2.2kw dhimis matoor ah, xawaaraha walaaqaya ee 15-25 rogo / min, 8-10mm saxan hoose oo qaro ah, iyo awoodda quudinta ee 75-90kg.
SKVQC-10 LIISKA ISKU XIRKA:
| Magaca | Maya | Summada/Saaraha | |
| dhaliye vacuum | 1pcs | Shiinaha | |
| 316L filter bir aan lahayn | 4pcs | Shiinaha | |
| 304 bir ah oo aan lahayn | 1set | Suko | |
| Nidaamka afuufista hawo-mareenka ah | Waalka dhabarka | 1set | New Zealand |
| Qayb pneumatic ah | AirTAC | ||
| Nidaamka faaruqinta hawada | 1set | Shiinaha | |
| Nidaamka xakamaynta | guddiga PC | 1set | Suko |
| Korontada beddeleysa | 1pcs | Shiinaha | |
| Solenoid valve | 1pcs | AirTAC | |
| Tuubbada nuugida | 3M | Jarmalka | |
| Dhuunta birta aan-dhuuqa lahayn (Φ25) | 1pcs | L 350mm | |
| Foosto aan bir lahayn | 1pcs | OD600mm;H700mm | |
| Gear Motor | 1pcs | 1.5KW 15-20r/m | |
QALABKA FARSAMADA:
| Qaabka | Isticmaalka hawada cufan | Cadaadiska hawada |
| SKVQC-10 | 180L/daqiiqo | 0.4-0.6MPa |
12. Qalab Ikhtiyaar ah oo la xidhiidha
| Qaabka Mashiinka | Dhererka dabaqa hoose | Dhererka mashiinka | Meel ka badan mashiinka | Dhexroorka daloolka |
| PFG150 | 3000-6000mm | 2460mm | 1000mm | 300mm |
| PFG300 | 3000-6000mm | 2879mm | 1000mm | 450mm |
| PFG500 | 3000-6000mm | 3100mm | 1000mm | 650mm |
| Magaca | Sharaxaad Kooban |
| PTFE budada foornada hore-sintering | Awoodda PTFE ee sinaysa |
| PTFE block burburiyaha | Burburka ku jajabi awoodda |
| Mashiinka budada shaandhada korontada | Si loo dabciyo budada ka hor inta aan la qasin |
| Walax dib loo warshadeeyay oo burburisa khadka ptubeuction | Dier, mashiinka dharka lagu dhaqdo, burburiyaha |
| Isku qasaha budada/ Budada & Isku-dhafka Kaaliyaha | Si aad budada ugu qasto saliidda dareeraha ah |
| Mashiinka goynta bar Hydraulic | Iska yaree tuubooyinka cabbirka weyn sida loo baahdo |